Xingte Technology published a stand report on 12 November 2026 covering the 30th China International Small Motor, Magnetic Materials and Robot Technology Exhibition, held 10 to 12 November at the Shanghai New International Expo Centre. The company gives its stand as Hall W1, B09A and frames the display around robot joint motor production rather than a single machine.

Fig. 1 - Robot joint motor production was the stated theme of the November stand. Illustrative image, AI-generated. Not a photograph of this event or of Xingte equipment.
1. The event in plain terms
The release names the exhibition, the dates, the venue and the stand number. It says the display combined a set of winding and joining machines with what it calls full-scenario flexible manufacturing solutions. The stated problem is familiar to motor engineers: insufficient precision, poor batch-to-batch consistency, and the cost of switching between many part numbers.
This is the most recent dated event in Xingte's 2026 public record, published roughly two weeks after the Canton Fair and five months after the Shanghai CWIEME show. Several of the same machine names appear in all three releases, which suggests a continuing product line rather than a one-off prototype display.
2. Machines and lines named in the release
The figures in the middle column are the company's own statements from the release. No test protocol, sample size or third-party measurement accompanies them.
| Item | Company-stated capability | Target part | What to verify |
|---|---|---|---|
| Frameless motor segmented winding machine | Servo tension system, high-precision enamel stripping, switchable 3 or 6 stations, stated production yield above 99 percent | Frameless motor stators | Wire range, yield definition, measurement window |
| Frameless motor round-up laser welding machine | Integrates stator assembly, laser welding and cooling; stated welding position accuracy of plus or minus 0.01 mm with vision guidance | High power density frameless motors | Roundness method, gauge resolution |
| Coreless motor winding machine | Full-process automation, constant-tension winding of enameled wire down to 0.02 mm as stated | Dexterous hand and micro motors | Breakage rate at minimum wire diameter |
| Robot joint module automatic line | Modular full-process line for joint motors and dexterous hand coreless motors | Humanoid and collaborative robot joints | Station list, takt time, changeover time |
3. Separating claims from verified results
The release also names a LiDAR galvanometer motor line with a stated yield of at least 98 percent and a UAV motor line covering assembly, welding and inspection. It says the stand received technical discussions with robot makers, vehicle makers and research institutes, and refers to preliminary cooperation intentions. No customer names, contract values, order quantities or signed agreements appear.
Yield figures quoted at an exhibition are process targets, not acceptance certificates. A buyer comparing two suppliers should ask for the inspection definition behind the percentage, the sample size, the part number it was measured on, and whether the figure covers winding only or the whole line.
4. Why this matters to a winding engineer
The consistent theme across the November release is the move from standalone winding machines to joined-up lines. That changes what has to be specified: tension control still matters, but so do hand-off between stations, vision alignment, and how quickly a line can be reconfigured for a different stator.
The practical next step is a sample winding trial on the buyer's own part, with the acceptance method written down before the machine is ordered. None of the figures in this release substitute for that record.
Sources: Shenzhen Xingte Technology, company news, 12 November 2026 (company-issued stand report).