CWIEME Shanghai 2026 opened on 24 June at the Shanghai World Expo Exhibition and Convention Centre. A media item published on 25 June places Xingte Technology at Hall 1, stand J27 and describes the event as gathering more than 500 exhibitors across humanoid robotics, new energy vehicles and industrial automation. The item is credited to a contributed news source, so it should be read as a republished company release rather than independent reporting.

Fig. 1 - The June stand grouped winding machines with complete automatic lines. Illustrative image, AI-generated. Not a photograph of this event or of Xingte equipment.
1. Event facts and source type
The page gives a clear date, venue, hall and stand number. It also states the themes the exhibitor chose to emphasise: humanoid robot joint motors and a set of whole-line solutions. A near-identical item appeared on another technology news site the same day, which confirms the dates and the equipment list but not the performance figures.
Both pages use promotional language. This brief keeps only the named items and the numbers that can be attributed, and labels them as company-stated.
2. Equipment and line list
The display, as described in the item, combined winding, joining and inspection equipment with five automatic lines. The table records the specifications exactly as stated, with the part each one targets.
| Item named in the release | Stated specification | Target part | Verification note |
|---|---|---|---|
| Frameless motor segmented winding machine | Servo tension, enamel stripping, 3 or 6 station switching, stated yield above 99 percent | Frameless motor stators | Yield definition not given |
| Round-up laser welding machine | Vision-guided welding, stated position accuracy of plus or minus 0.01 mm | High power density stators | Roundness measurement not described |
| Coreless motor winding machine | Constant-tension winding down to 0.02 mm wire, as stated | Dexterous hand micro motors | No breakage data at minimum wire size |
| Eight-axis precision winding machine | Spindle speed up to 12,000 rpm and positioning accuracy of 0.01 mm | Transformers and magnetic coils | Accuracy across full speed range not stated |
| LiDAR galvanometer motor line | Stated yield of at least 98 percent | LiDAR scanning drive motors | Inspection scope and sample size absent |
3. Where the numbers come from
The 99 percent yield, the 0.01 mm positioning accuracy, the 12,000 rpm spindle speed, the 0.02 mm wire diameter and the plus-or-minus 0.01 mm welding accuracy all appear inside the contributed release. No independent test report, measurement standard, calibration record or batch size is cited alongside them.
The release also mentions technical discussions and preliminary cooperation intentions on the first day, without naming any party or giving a contract value. Those sentences describe activity at a stand, not a commercial result.
4. What a buyer should request next
Ask for a machine datasheet that defines accuracy at a stated speed and temperature, a sample winding report on your own part, and an acceptance protocol that lists the measuring instrument and its calibration date. For a whole line, add the station list, the takt time and the changeover procedure between two named part numbers.
These requests are ordinary procurement practice. They also turn a set of exhibition numbers into something that can actually be compared with another supplier's offer.
Sources: China.com digital, 25 June 2026 (contributed media item). Ynet technology, 25 June 2026 (same-day mirror).