What Axial-Flux Motor Stators Demand from Winding Equipment
What Axial-Flux Motor Stators Demand from Winding Equipment

An axial-flux stator puts the winding on a disc rather than inside a cylindrical bore, which changes tooling, traverse, end-turn routing and part handling. This article traces those demands back to the winding process without assuming a specific motor design or quoting performance figures.

2026-11-19 39
What Stepper and Servo Motor Stators Demand from Winding Uniformity
What Stepper and Servo Motor Stators Demand from Winding Uniformity

Position-control motors are sensitive to differences between phases. This guide translates uniformity requirements into winding-process terms: turn matching, placement, termination and the measurements that can reveal a systematic difference.

2026-11-18 37
What EV Traction Motor Designs Demand from Stator Windings
What EV Traction Motor Designs Demand from Stator Windings

Motor designers optimise efficiency, thermal behaviour, insulation margin and NVH. Each of those targets translates into a measurable winding requirement. This guide works backwards from motor specifications to slot fill, insulation stress, thermal paths and end-turn geometry.

2026-11-16 46
Loading...