Winding Geometry Terms Explained: Traverse, Winding Width, Build-Up and Clearance
Winding Geometry Terms Explained: Traverse, Winding Width, Build-Up and Clearance

Winding specifications mix axial and radial terms, which is why two engineers can read the same drawing and picture different coils. This guide defines traverse, winding width, pitch, build-up, fill factor and flange clearance, and shows where each term is commonly misused.

2026-11-19 43
Winding Defect Terms Explained: Crossovers, Gaps, Bulges and Loose Turns
Winding Defect Terms Explained: Crossovers, Gaps, Bulges and Loose Turns

Defect names are often used loosely on the shop floor, which makes a fault log hard to act on. This glossary gives plain definitions for common winding flaws, the conditions that produce them, and how each term differs from its nearest neighbour.

2026-11-18 31
Coil Winding Terms Explained: Tension, Layering, Pitch and Fill Factor
Coil Winding Terms Explained: Tension, Layering, Pitch and Fill Factor

Two engineers can read the same winding specification and order different machines. This glossary defines tension setpoint and peak, traverse pitch, layer transitions, fill factor and resistance, with the units normally used and the misuse that causes specification errors.

2026-11-16 46
Loading...